Configure Stpd Mode - Extreme Networks ExtremeWare Command Reference Manual

configure stpd mode

configure stpd <spanning tree name> mode [dot1d | dot1w]
Description
Configures the operational mode for the specified STP domain.
Syntax Description
spanning tree name
dot1d
dot1w
Default
Operates in 802.1d mode.
Usage Guidelines
If you configure the STP domain in 802.1d mode, the rapid reconfiguration mechanism is disabled.
If you configure the STP domain in 802.1w mode, the rapid reconfiguration mechanism is enabled.
Example
The following command configures STPD s1 to enable the rapid reconfiguration mechanism and operate
in 802.1w mode:
configure stpd s1 mode dot1w
History
This command was first available in ExtremeWare 7.1.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies an STPD name on the switch.
Specifies the STPD mode of operation to be 802.1d.
Specifies the STPD mode of operation to be 802.1w, and rapid configuration is enabled.
configure stpd mode
1445