Configure Eaps Mode - Extreme Networks ExtremeWare Command Reference Manual

configure eaps mode

configure eaps <name> mode [master | transit]
Description
Configures the switch as either the EAPS master node or as an EAPS transit node for the specified
domain.
Syntax Description
name Specifies the name of an EAPS domain.
master Specifies that this switch should be the master node for the named EAPS domain.
transit Specifies that this switch should be the transit node for the named EAPS domain.
Default
N/A
Usage Guidelines
None
Example
The following command identifies this switch as the master node for the domain named eaps_1:
configure eaps eaps_1 mode master
The following command identifies this switch as a transit node for the domain named eaps_1:
configure eaps eaps_1 mode transit
History
This command was first available in ExtremeWare 6.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
configure eaps mode
1465