Show Access-List - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

show access-list

show access-list {<name> | port <portlist>}
Description
Displays access list information and real-time statistics.
Syntax Description
name
portlist
Default
Shows information for all access lists.
Usage Guidelines
To verify access list settings, you can view the access list configuration and see real-time statistics on
which access list entries are being accessed when processing traffic.
Example
The following command shows information on all current the access lists:
show access-list
It produces output similar to the following:
Rule Dest/mask:L4DP
test1 0.0.0.0/ 0:
Flags: I=IP, T=TCP, U=UDP, E=Established, M=ICMP
P=Permit Rule, D=Deny Rule
N=Port Specific Rule, X=Any Port
The following command shows real-time access list statistics for ingress ports 5-7:
show access-list port 5-7
The following command shows information for access list test1:
show access-list test1
918
Specifies the name of an access list to be displayed.
Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.
Src/mask:L4SP
0 0.0.0.0/ 0:
Flags Hits
0 I-P-X 1531
ExtremeWare Software 7.3.0 Command Reference Guide