Delete Protocol - Extreme Networks ExtremeWare Command Reference Manual

VLAN Commands

delete protocol

delete protocol <protocol_name>
Description
Deletes a user-defined protocol.
Syntax Description
protocol_name Specifies a protocol name.
Default
N/A.
Usage Guidelines
If you delete a protocol that is in use by a VLAN, the protocol associated with than VLAN will become
"None."
Example
The following command deletes a protocol named fred:
delete protocol fred
History
This command was first available in ExtremeWare 1.0.
Platform Availability
This command is available on all platforms.
248 ExtremeWare Software 7.0.0 Command Reference Guide