Arp Retries; Arp Timeout - Dell Force10 MXL Blade Reference Manual

Defaults Disabled
Command Modes
CONFIGURATION
Command
Version 8.3.16.1
History

arp retries

Set the number of ARP retries in case the system does not receive an ARP reply in response to an ARP
request.
Syntax
arp retries number
Parameters
number
Defaults
5
Command Modes CONFIGURATION
Command
Version 8.3.16.1
History
Usage
Retries are 20 seconds apart.
Information
Related
show arp retries
Commands

arp timeout

Set the time interval for an ARP entry to remain in the ARP cache.
Syntax arp timeout minutes
To return to the default value, use the no arp timeout command.
Parameters
seconds
Defaults 240 minutes (4 hours)
Command Modes
INTERFACE
Command
Version 8.3.16.1
History
Related
show interfaces
Commands
Introduced on MXL 10/40GbE Switch IO Module
Enter the number of retries.
Range: 5 to 20.
Default: 5
Introduced on MXL 10/40GbE Switch IO Module
Displays the configured number of ARP retries.
Enter the number of minutes.
Range: 0 to 35790
Default: 240 minutes
Introduced on MXL 10/40GbE Switch IO Module
Displays the ARP timeout value for all available interfaces.
IPv4 Routing | 291