Dhcp L2Relay Vlan - Dell PowerEdge M420 Reference Manual

Configuration Mode
Interface Configuration (Ethernet, Port-channel).
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-1/0/1)#dhcp l2relay trust

dhcp l2relay vlan

Use the dhcp l2relay vlan command to enable the L2 DHCP Relay agent for
a set of VLANs. All DHCP packets which arrive on interfaces in the
configured VLAN are subject to L2 Relay processing. Use the "no" form of
this command to disable L2 DHCP Relay for a set of VLANs.
Syntax
dhcp l2relay vlan
no dhcp l2relay vlan
Parameter Description
Parameter
vlan-range
Default Configuration
DHCP L2 Relay is disabled on all VLANs by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
vlan-range
vlan-range
Description
The list of VLAN IDs.
DHCP Layer 2 Relay Commands
315