Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS MANUAL VOLUME 1 REV 2.3 Manual page 1012

fpmin — Floating-point Parallel Minimum
( ) fpmin.
Format: qp
The paired single precision values in the significands of FR
Description:
operands with the smaller value is returned in significand of FR
If the value of high (low) FR
gets high (low) FR
If high (low) FR
The exponent field of FR
sign field of FR
If either FR
This operation does not propagate NaNs the same way as other arithmetic
floating-point instructions. The Invalid Operation is signaled in the same manner as for
the fpcmp.lt operation.
The mnemonic values for sf are given in
Operation: if (PR[qp]) {
fp_check_target_register(f
if (tmp_isrcode = fp_reg_disabled(f
disabled_fp_register_fault(tmp_isrcode, 0);
if (fp_is_natval(FR[f
FR[f
} else {
fpminmax_exception_fault_check(f
if (fp_raise_fault(tmp_fp_env))
tmp_fr2 = tmp_left = fp_reg_read_hi(f
tmp_fr3 = tmp_right = fp_reg_read_hi(f
tmp_bool_res = fp_less_than(tmp_left, tmp_right);
tmp_res_hi = fp_single(tmp_bool_res ? tmp_fr2: tmp_fr3);
tmp_fr2 = tmp_left = fp_reg_read_lo(f
tmp_fr3 = tmp_right = fp_reg_read_lo(f
tmp_bool_res = fp_less_than(tmp_left, tmp_right);
tmp_res_lo = fp_single(tmp_bool_res ? tmp_fr2: tmp_fr3);
FR[f
FR[f
FR[f
fp_update_fpsr(sf, tmp_fp_env);
}
fp_update_psr(f
}
Invalid Operation (V)
FP Exceptions:
Denormal/Unnormal Operand (D)
Software Assist (SWA) fault
Volume 3: Instruction Reference
= ,
sf f f f
1 2 3
is less than the value of high (low) FR
f
2
. Otherwise high (low) FR
f
2
or high (low) FR
f
2
is set to the biased exponent for 2.0
f
1
is set to positive (0).
f
1
or FR is a NaTVal, FR
f f
2 3
]) || fp_is_natval(FR[f
2
] = NATVAL;
1
fp_exception_fault(fp_decode_fault(tmp_fp_env));
].significand = fp_concatenate(tmp_res_hi, tmp_res_lo);
1
].exponent = FP_INTEGER_EXP;
1
].sign = FP_SIGN_POSITIVE;
1
);
1
gets high (low) FR
f
1
is a NaN, high (low) FR
f
3
is set to NaTVal instead of the computed result.
f
1
Table 2-23 on page
);
1
, f , f , 0))
1 2 3
])) {
3
, f , sf, &tmp_fp_env);
2 3
);
2
);
3
);
2
);
3
fpmin
or FR are compared. The
f f
2 3
.
f
1
, high (low) FR
f
3
.
f
3
gets high (low) FR
f f
1
63
(0x1003E) and the
3:56.
F8
f
1
.
3
3:113