Interface Types And Specifiers; Chapter 1 Command Reference Topics; Table 3: Interface Types And Specifiers For Erx7Xx Models, Erx14Xx Models - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

Related Topics

Interface Types and Specifiers

Copyright © 2010, Juniper Networks, Inc.
ip debounce-time 0
router rip
For a list of regular expressions, see Using Regular Expressions in the JunosE IP Services
Configuration Guide
Many commands take the variables interfaceType and interfaceSpecifier. Some commands
support all types of interfaces, whereas other commands support only certain types of
interfaces. Similarly, some commands support all interface specifier formats for a
particular interface type, whereas other commands support only certain interface specifier
formats.
Table 3 on page 5 lists the interface specifiers for each type of interface on ERX7xx
models, ERX14xx models, and the Juniper Networks ERX310 Broadband Services Router.
NOTE: On ERX7xx models, ERX14xx models, and the ERX310 router, you can use the
atm slot/port/vpi/vci interface specifier format as an alternative to the atm
slot/port.subinterface format with the specific show interface and show subinterface
commands to monitor all ATM 1483 subinterfaces (except NBMA interfaces) as well
as the upper-layer interfaces configured over an ATM 1483 subinterface. You cannot,
however, use the atm slot/port/vpi/vci format to create or modify an ATM 1483
subinterface.
Table 4 on page 13 lists the interface specifiers for each type of interface on the Juniper
Networks E120 and E320 Broadband Services Routers.
NOTE: On the E120 router and the E320 router you can use the atm
slot/adapter/port/vpi/vci interface specifier format as an alternative to the atm
slot/adapter/port.subinterface format with the specific show interface and show
subinterface commands to monitor all ATM 1483 subinterfaces (except NBMA
interfaces) as well as the upper-layer interfaces configured over an ATM 1483
subinterface. You cannot, however, use the atm slot/adapter/port/vpi/vci format to
create or modify an ATM 1483 subinterface.
Table 3: Interface Types and Specifiers for ERX7xx Models, ERX14xx
Models, and ERX310 Router
Interface Type Description
atm ATM
interface or
ATM 1483
subinterface
Chapter 1: Command Reference Topics
Interface Specifier
Refer to the individual formats listed below.
Example
5