Install - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

install

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
(install | no-install);
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options static (defaults | route)],
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options rib routing-table-name static (defaults | route)],
[edit logical-systems logical-system-name routing-options rib routing-table-name static
(defaults | route)],
[edit logical-systems logical-system-name routing-options static (defaults | route)],
[edit routing-instances routing-instance-name routing-options rib routing-table-name static
(defaults | route)],
[edit routing-instances routing-instance-name routing-options static (defaults | route)],
[edit routing-options rib routing-table-name static (defaults | route)]
[edit routing-options static (defaults | route)]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure whether the Junos OS installs all static routes into the forwarding table. Even
if you configure a route so it is not installed in the forwarding table, the route is still eligible
to be exported from the routing table to other protocols.
—Explicitly install all static routes into the forwarding table.
install
—Do not install the route into the forwarding table, even if it is the route with
no-install
the lowest preference.
Default:
install
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
static on page 2197
Configuring Static Routes
Chapter 79: Configuration Statements for Layer 3 Protocols
2057