Import-Rib - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

import-rib

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
import-rib [ routing-table--names ];
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options rib-group group-name],
[edit logical-systems logical-system-name routing-options rib-group group-name],
[edit routing-instances routing-instance-name routing-options rib-group group-name],
[edit routing-options rib-group group-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Name of the routing table into which the Junos OS should import routing information.
The first routing table name you enter is the primary routing table. Any additional names
you enter identify secondary routing tables. When a protocol imports routes, it imports
them into the primary and any secondary routing tables. If the primary route is deleted,
the secondary route also is deleted. For IPv4 import routing tables, the primary routing
table must be or
inet.0 routing-instance-name.inet.0
primary routing table must be
In Junos OS Release 9.5 and later, you can configure an IPv4 import routing table that
includes both IPv4 and IPv6 routing tables. Including both types of routing tables permits
you, for example, to populate an IPv6 routing table with IPv6 addresses that are
compatible with IPv4. In releases prior to Junos OS Release 9.5, you could configure an
import routing table with only either IPv4 or IPv6 routing tables.
routing-table-names —Name of one or more routing tables.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
export-rib on page 2016
passive
Creating Routing Table Groups
Chapter 79: Configuration Statements for Layer 3 Protocols
. For IPv6 import routing tables, the
.
inet6.0
2055