Msti - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

msti

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
msti msti-id {
vlan (vlan-id | vlan-name);
interface interface-name {
disable;
cost cost;
priority priority;
}
}
[edit protocols mstp]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure the Multiple Spanning Tree Instance (MSTI) identifier for Multiple Spanning
Tree Protocol (MSTP). MSTI IDs are local to each region, so you can reuse the same MSTI
ID in different regions.
MSTI is disabled.
—MSTI identifier.
msti-id
Range: 1 through 4094. The Common Instance Spanning Tree (CIST) is always MSTI 0.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show spanning-tree bridge on page 1878
show spanning-tree interface on page 1887
Example: Configuring Network Regions for VLANs with MSTP on EX Series Switches
on page 1775
Understanding MSTP for EX Series Switches on page 1755
Chapter 74: Configuration Statements for Spanning-Tree Protocols
1851