CHAPTER 76
Layer 3 Protocols—Overview
Layer 3 Protocols Supported on EX Series Switches
Table 269: Supported Junos OS Layer 3 Protocol Statements and Features
Protocol
Notes
BGP
Fully supported.
BFD
Fully supported.
ICMP
Fully supported.
IGMPv1, v2 and v3
Fully supported.
IS-IS
Supported, with the exceptions noted in "Layer 3
Protocols Not Supported on EX Series Switches" on
page 18.
MLD
Supported on EX3200, EX4200, and EX8200
switches (MLD versions 1 and 2).
MPLS
Supported, with the exceptions noted in "Layer 3
Protocols Not Supported on EX Series Switches" on
page 18.
Copyright © 2010, Juniper Networks, Inc.
Layer 3 Protocols Supported on EX Series Switches on page 1901
Layer 3 Protocols Not Supported on EX Series Switches on page 1902
Understanding Distributed Periodic Packet Management on EX Series
Switches on page 1904
Understanding IPsec Authentication for OSPF Packets on EX Series Switches on page 1905
EX Series switches support the Junos OS Layer 3 features and configuration statements
listed in Table 20 on page 17:
For More Information
Junos OS Routing Protocols Configuration
See the
Guide.
See the
Junos OS Routing Protocols Configuration
Guide.
Junos OS Routing Protocols Configuration
See the
Guide.
Junos OS Multicast Protocols
See the
Configuration Guide .
Junos OS Routing Protocols Configuration
See the
Guide.
Junos OS Multicast Protocols
See the
Configuration Guide .
Junos OS MPLS Applications
See the
Configuration Guide.
1901