Mstp - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

mstp

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
1852
®
OS for EX Series Ethernet Switches, Release 10.4
mstp {
disable;
bpdu-block-on-edge;
bridge-priority priority;
configuration-name name;
forward-delay seconds;
hello-time seconds;
interface ( all | interface-name {
bpdu-timeout-action {
block;
log;
}
disable;
cost cost;
edge;
mode mode;
no-root-port;
priority priority;
}
max-age seconds;
max-hops hops;
msti msti-id {
vlan (vlan-id | vlan-name);
interface interface-name {
disable;
cost cost;
priority priority;
}
}
traceoptions {
file filename <files number > <size size> <no-stamp | world-readable |
no-world-readable>;
flag flag;
}
revision-level revision-level;
}
[edit protocols]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure Multiple Spanning Tree Protocol (MSTP). MSTP is defined in the IEEE
802.1Q-2003 specification and is used to create a loop-free topology in networks with
multiple spanning tree regions.
The statements are explained separately.
MSTP is disabled.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Copyright © 2010, Juniper Networks, Inc.