Table of Contents
Advertisement
Version Summary
New Features
New or Changed Information
Before You Install NSM
Solaris Locales
Upgrade Considerations
Upgrading NSM
Copyright © 2010, Juniper Networks, Inc.
Juniper Networks Network and Security Manager (NSM) is a software application that
centralizes control and management of your Juniper Networks devices. With NSM, Juniper
Networks delivers integrated, policy-based security and network management for all
security devices and other Juniper Networks devices in your networks. NSM uses the
technology developed for Juniper Networks ScreenOS to enable and simplify management
support for previous and current versions of ScreenOS and now for Junos operating
system (Junos OS). By integrating management of all Juniper Networks devices, NSM
enhances the overall security and manageability of the Internet gateway.
The new feature in this release of NSM is support for configuring NAT on devices that
run on the Junos OS.
The following provides the new or changed information for this release:
NSM supports management of SRX Series devices in packet and mixed mode.
The wireless encryption configuration field,
> radio > virtual access point > security
The
column of the firewall policy has been moved from the last position to
Comment
the third position from the last.
Before installing NSM on a Solaris server, you must install a specific set of locales, and
make appropriate edits to the
and Security Manager Installation Guide.
This section contains information about upgrading NSM and deprecated operating
systems.
You can upgrade to NSM 2010.3 from the following versions:
2008.2RX
2009.1RX
2010.1
2010.2
Static WEP
) has been renamed to Wireless Encryption.
/etc/default/init
file. For more information, see the Network
Version Summary
(
config > wlan > access point
3
Advertisement
Table of Contents
