Authentication-Key - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

authentication-key

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
authentication-key key;
[edit logical-systems logical-system-name protocols bgp],
[edit logical-systems logical-system-name protocols bgp group group-name],
[edit logical-systems logical-system-name protocols bgp group group-name
neighbor address],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name neighbor address],
[edit protocols bgp],
[edit protocols bgp group group-name],
[edit protocols bgp group group-name neighbor address],
[edit routing-instances routing-instance-name protocols bgp],
[edit routing-instances routing-instance-name protocols bgp group group-name],
[edit routing-instances routing-instance-name protocols bgp group group-name
neighbor address]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure an MD5 authentication key (password). Neighboring routing devices use the
same password to verify the authenticity of BGP packets sent from this system.
key —Authentication password. It can be up to 126 characters. Characters can include
any ASCII strings. If you include spaces, enclose all characters in quotation marks
(" ").
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Authentication for BGP
Chapter 79: Configuration Statements for Layer 3 Protocols
1959