Show Route Label - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show route label

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show route label show route label
Copyright © 2010, Juniper Networks, Inc.
show route label label
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route label label
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Display the routes based on a specified Multiprotocol Label Switching (MPLS) label
value.
—Value of the MPLS label.
label
brief | detail | extensive | terse
not specify a level of output, the system defaults to brief.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show route label on page 2467
show route label detail on page 2468
show route label extensive on page 2468
show route label terse on page 2468
For information about output fields, see the output field table for the show route
command, the show route detail command, the show route extensive command, or
the show route terse command.
user@host> show route label 100016
mpls.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both
100016 *[VPN/170] 03:25:41
> to 10.12.80.1 via ge-6/3/2.0, Pop
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Display the specified level of output. If you do
—(Optional) Perform this operation on all logical
2467