Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2600

Complete Software Guide for Junos
Table 332: show route receive-protocol Output Fields (continued)
Field Name Field Description
Number of routes in the routing table and total number of routes in the following
number routes
states:
active
holddown
hidden
Destination prefix.
Prefix
Multiple exit discriminator value included in the route.
MED
Destination prefix. The
destination-prefix
and the
(entry, announced)
destination.
64-bit prefix added to IP subnets to make them unique.
Route Distinguisher
Label-Base, range First label in a block of labels and label block size. A remote PE routing device
uses this first label when sending traffic toward the advertising PE routing device.
Virtual private network (VPN) label. Packets are sent between CE and PE routing
VPN Label
devices by advertising VPN labels. VPN labels transit over either a Resource
Reservation Protocol (RSVP) or a Label Distribution Protocol (LDP)
label-switched path (LSP) tunnel.
Next hop Next hop to the destination. An angle bracket (>) indicates that the route is the
selected route.
or Local preference value included in the route.
Localpref Lclpref
2496
®
OS for EX Series Ethernet Switches, Release 10.4
(routes in that are pending state before being declared inactive)
(the routes are not used because of a routing policy)
value is the number of routes for this destination,
entry
value is the number of routes being announced for this
announced
Level of Output
All levels
none
brief
none
brief
detail extensive
detail extensive
detail extensive
detail extensive
All levels
All levels
Copyright © 2010, Juniper Networks, Inc.