Required Privilege
Level
Related
Documentation
passive
Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
NOTE: Multitopology Routing does not support the
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring OSPF to Make Routing Devices Appear Overloaded
Configuring Multitopology Routing in OSPF
passive;
[edit logical-systems logical-system-name protocols bgp],
[edit logical-systems logical-system-name protocols bgp group group-name],
[edit logical-systems logical-system-name protocols bgp group group-name
neighbor address],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name neighbor address],
[edit protocols bgp],
[edit protocols bgp group group-name],
[edit protocols bgp group group-name neighbor address],
[edit routing-instances routing-instance-name protocols bgp],
[edit routing-instances routing-instance-name protocols bgp group group-name],
[edit routing-instances routing-instance-name protocols bgp group group-name
neighbor address]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Do not send active open messages to the peer. Rather, wait for the peer to issue an open
request.
If you omit this statement, all explicitly configured peers are active, and each peer
periodically sends open requests until its peer responds.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Disabling Transmission of Open Requests to BGP Peers
Chapter 79: Configuration Statements for Layer 3 Protocols
timeout
option.
2135