Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2334

Complete Software Guide for Junos
type-7
Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
2230
®
OS for EX Series Ethernet Switches, Release 10.4
type-7;
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id nssa
default-lsa],
[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id nssa default-lsa],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id nssa default-lsa],
[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id nssa default-lsa],
[edit protocols (ospf | ospf3) area area-id nssa default-lsa],
[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id nssa
default-lsa],
[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id nssa
default-lsa],
[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id nssa default-lsa]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for the statement introduced in Junos OS Release 9.2.
realm
Support for the statement introduced in Junos OS Release 9.2 for EX Series
realm
switches.
Flood Type 7 default link-state advertisements (LSAs) if the
is configured.
By default, when the
no-summaries
not-so-stubby areas (NSSAs) for Junos OS Release 5.0 and later. To support backward
compatibility with earlier Junos OS Releases, include the
enables NSSA ABRs to advertise a Type 7 default LSA into the NSSA if you have also
included the
no-summaries
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring OSPF Areas
statement is configured, a Type 3 LSA is injected into
statement in the configuration.
statement
no-summaries
statement. This statement
type-7
Copyright © 2010, Juniper Networks, Inc.