Complete Software Guide for Junos
transit-delay
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
2228
®
OS for EX Series Ethernet Switches, Release 10.4
transit-delay seconds;
[edit logical-systems logical-system-name protocols ospf area area-id peer-interface
interface-name],
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id interface
interface-name],
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id virtual-link],
[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf area area-id interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf area area-id virtual-link],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface
interface-name],
[edit protocols ospf area area-id peer-interface interface-name],
[edit protocols (ospf | ospf3) area area-id interface interface-name],
[edit protocols (ospf | ospf3) area area-id virtual-link],
[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)] area area-id
interface interface-name],
[edit routing-instances routing-instance-name protocols ospf area area-id interface
interface-name],
[edit routing-instances routing-instance-name protocols ospf area area-id virtual-link],
[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id interface interface-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for the
statement introduced in Junos OS Release 9.2.
realm
Support for the
statement introduced in Junos OS Release 9.2 for EX Series
realm
switches.
Set the estimated time required to transmit a link-state update on the interface. When
calculating this time, make sure to account for transmission and propagation delays.
You should never have to modify the transit delay time.
seconds
—Estimated time, in seconds.
Range: 1 through 65,535 seconds
Default: 1 second
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring OSPF Timers
Copyright © 2010, Juniper Networks, Inc.