Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1966

Complete Software Guide for Junos
vlan
Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
1862
®
OS for EX Series Ethernet Switches, Release 10.4
vlan (vlan-id | vlan-name) {
bridge-priority priority;
forward-delay seconds;
hello-time seconds;
interface interface-name {
bpdu-timeout-action {
block;
log;
}
cost cost;
disable;
edge;
mode mode;
no-root-port;
priority priority;
}
max-age seconds;
traceoptions {
file filename <files number > <size size> <no-stamp | world-readable |
no-world-readable>;
flag flag;
}
}
[edit protocols mstp msti msti-id]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement updated with enhanced
Release 9.5 for EX Series switches.
Configure the VLANs for a Multiple Spanning Tree Instance (MSTI).
TIP: To display a list of all configured VLANs on the system, including VLANs
that are configured but not committed, type
configuration mode command line. Note that only one VLAN is displayed for
a VLAN range.
Not enabled.
vlan-id —Numeric VLAN identifier.
—Name of the VLAN.
vlan-name
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
(CLI completion feature) functionality in Junos OS
?
after
?
Copyright © 2010, Juniper Networks, Inc.
or in your
vlan vlans