Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2634

Complete Software Guide for Junos
Table 335: show route terse Output Fields (continued)
Field Name Field Description
Key for the state of the route:
route key
Active route. An asterisk (*) indicates this is the active route.
A
Destination of the route.
Destination
Protocol through which the route was learned:
P
Preference value of the route. In every routing metric except for the BGP
Prf
value is preferred. In order to use common comparison routines, Junos OS stores the 1's complement
of the
the
Route 2 is preferred because if has a higher
First metric value in the route. For routes learned from BGP, this is the MED metric.
Metric 1
Second metric value in the route. For routes learned from BGP, this is the IGP metric.
Metric 2
Next hop to the destination. An angle bracket (>) indicates that the route is the selected route.
Next hop
AS path through which the route was learned. The letters at the end of the AS path indicate the path
AS path
origin, providing an indication of the state of the route at the point at which the AS path originated:
2530
®
OS for EX Series Ethernet Switches, Release 10.4
—A plus sign indicates the active route, which is the route installed from the routing table into the
+
forwarding table.
—A hyphen indicates the last active route.
-
—An asterisk indicates that the route is both the active and the last active route. An asterisk before
*
a to line indicates the best subpath to the route.
—Aggregate
A
—BGP
B
—CCC
C
D —Direct
—GMPLS
G
—IS-IS
I
—L2CKT, L2VPN, LDP, Local
L
—Kernel
K
M —MPLS, MSDP
O —OSPF
—PIM
P
—RIP, RIPng
R
—Static
S
T —Tunnel
value in the
LocalPref Preference2
value is -101. If the
Preference2
—IGP.
I
—EGP.
E
—Incomplete; typically, the AS path was aggregated.
?
field. For example, if the
value for Route 2 is 155, the
LocalPref
value and a lower
LocalPref
attribute, a lesser
LocalPref
value for Route 1 is 100,
LocalPref
value is -156.
Preference2
value.
Preference2
Copyright © 2010, Juniper Networks, Inc.