Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2228

Complete Software Guide for Junos
no-rfc-1583
Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
2124
®
OS for EX Series Ethernet Switches, Release 10.4
no-rfc-1583;
[edit logical-systems logical-system-name protocols (ospf | ospf3)],
[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast)],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3)],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)],
[edit protocols (ospf | ospf3)],
[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)],
[edit routing-instances routing-instance-name protocols (ospf | ospf3)],
[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast)]
Statement introduced in Junos OS Release 8.5.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for the statement introduced in Junos OS Release 9.2.
realm
Support for the realm statement introduced in Junos OS Release 9.2 for EX Series
switches.
Disable compatibility with RFC 1583, OSPF Version 2. If the same external destination is
advertised by AS boundary routers that belong to different OSPF areas, disabling
compatibility with RFC 1583 can prevent routing loops.
Compatibility with RFC 1583 is enabled by default.
routing—To view this statement in the configuration.
routing-control-level—To add this statement to the configuration.
Disabling OSPFv2 Compatibility with RFC 1583
Copyright © 2010, Juniper Networks, Inc.