Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2204

Complete Software Guide for Junos
Required Privilege
Level
Related
Documentation
2100
®
OS for EX Series Ethernet Switches, Release 10.4
NOTE: You cannot configure
level.
igp —Set the metric to the most recent metric value calculated in the IGP to get to the
BGP next hop.
—Primary metric on all routes sent to peers.
metric
Range: 0 through 4,294,967,295 (2
Default: No metric is sent.
—Set the metric to the minimum metric value calculated in the IGP to get
minimum-igp
to the BGP next hop. If a newly calculated metric is greater than the minimum metric
value, the metric value remains unchanged. If a newly calculated metric is lower, the
metric value is lowered to that value.
—(Optional) Increases or decreases the metric by this value.
offset
31 31
Range: –2 through 2 – 1
Default: None
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
med-igp-update-interval on page 2091
Configuring the MED in BGP Updates
delay-med–update statement at the global BGP
32
– 1)
Copyright © 2010, Juniper Networks, Inc.