Redundant-Trunk-Group; Registration - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

redundant-trunk-group

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

registration

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
1690
®
OS for EX Series Ethernet Switches, Release 10.4
redundant-trunk-group {
group name {
interface interface-name <primary>;
interface interface-name;
}
}
[edit ethernet-switching-options]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure a primary link and secondary link on trunk ports. If the primary link fails, the
secondary link automatically takes over without waiting for normal STP convergence.
The statements are explained separately.
system—To view this statement in the configuration.
system–control—To add this statement to the configuration.
Example: Configuring Redundant Trunk Links for Faster Recovery on page 1563
Understanding Redundant Trunk Links on EX Series Switches on page 1512
registration (forbidden | normal);
[edit protocols mvrp interface (all | interface-name)]
Statement introduced in Junos OS Release 10.0 for EX Series switches.
Specifies the Multiple VLAN Registration Protocol (MVRP) registration mode for the
interface if MVRP is enabled.
normal
—The interface or interfaces do not register and do not participate in MVRP.
forbidden
—The interface or interfaces accept MVRP messages and participate in MVRP.
normal
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Multiple VLAN Registration Protocol (MVRP) (CLI Procedure) on page 1611
Copyright © 2010, Juniper Networks, Inc.