Verifying That Mvrp Is Working Correctly - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Related
Documentation

Verifying That MVRP Is Working Correctly

Purpose
Action
Meaning
1630
®
OS for EX Series Ethernet Switches, Release 10.4
Configuring GVRP (J-Web Procedure) on page 1608
Example: Configure Automatic VLAN Administration Using GVRP on page 1549
After configuring your EX Series switch to participate in MVRP, verify that the configuration
is properly set and that MVRP messages are being sent and received on your switch.
Confirm that MVRP is enabled on your switch.
1.
user@switch> show mvrp
Global MVRP configuration
MVRP status
MVRP dynamic vlan creation: Enabled
MVRP Timers (ms):
Interface
--------------
all
xe-0/1/1.0
Interface based configuration:
Interface
--------------
all Disabled
xe-0/1/1.0
Confirm that MVRP messages are being sent and received on your switch.
2.
user@switch> show mvrp statistics interface xe-0/1/1.0
MVRP statistics
MRPDU received
Invalid PDU received
New received
Join Empty received
Join In received
Empty received
In received
Leave received
LeaveAll received
MRPDU transmitted
MRPDU transmit failures
New transmitted
Join Empty transmitted
Join In transmitted
Empty transmitted
In transmitted
Leave transmitted
LeaveAll transmitted
The output of shows that interface
show mvrp
as shown in the status in the
: Enabled
Join Leave LeaveAll
---- ----- --------
200 600 10000
200 600 10000
Status Registration
-------- ------------
Fixed Enabled
Enabled Normal
: 3342
: 0
: 2
: 1116
: 2219
: 2
: 2
: 1
: 1117
: 3280
: 0
: 0
: 1114
: 2163
: 1
: 1
: 1
: 1111
xe-0/1/1.0
Interface based configuration
Copyright © 2010, Juniper Networks, Inc.
Dynamic VLAN Creation
---------------------
Enabled
is enabled for MVRP participation
field.