No-Unicast-Topology; No-Validate - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

no-unicast-topology

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation

no-validate

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
no-unicast-topology;
[edit logical-systems logical-system-name protocols isis interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
isis interface interface-name],
[edit protocols isis interface interface-name],
[edit routing-instances routing-instance-name protocols isis interface interface-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Exclude an interface from the IPv4 unicast topologies.
IPv4 unicast topologies are disabled.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring IS-IS Multicast Topologies
no-validate policy-name;
[edit protocols bgp group group-name family (inet | inet flow)],
[edit protocols bgp group group-name neighbor address family (inet | inet flow)],
[edit routing-instances routing-instance-name protocols bgp group group-name family (inet
| inet flow)],
[edit routing-instances routing-instance-name protocols bgp group group-name neighbor
address family (inet | inet flow)]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Omits the flow route validation procedure after packets are accepted by a policy.
—Import policy to match NLRI messages.
policy-name
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Enabling BGP to Carry Flow-Specification Routes
Chapter 79: Configuration Statements for Layer 3 Protocols
2125