Figure 52: Mvr Topology In Transparent Mode - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
2548
®
OS for EX Series Ethernet Switches, Release 10.4

Figure 52: MVR Topology in Transparent Mode

Figure 53 on page 2549 shows the MVR topology in proxy mode. Interfaces P1 and P2 on
switch C belong to MVLAN
access port of customer VLAN
traffic is being carried on customer VLAN
c0 is replicated untagged to port P4 based on streams received in MVLAN
traffic flows from port P4 out to an IPTV-enabled device in Host 1. Other traffic, such as
data and voice traffic, also flows from port P4 to other network devices in Host 1.
mv0 and customer VLAN c0
. In the upstream direction of the network, only non-IPTV
c0
. Any IPTV traffic requested by hosts on VLAN
c0
. Interface P4 on switch C is an
mv0 . IPTV
Copyright © 2010, Juniper Networks, Inc.