Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2045

Table 284: Summary of Key Routing Information Output Fields (continued)
Field Values
Next-Hop Network layer address of the directly reachable
neighboring system (if applicable) and the interface
used to reach it.
Age How long the route has been active.
State Flags for this route.
AS Path AS path through which the route was learned. The
letters of the AS path indicate the path origin:
—IGP.
I
—EGP.
E
—Incomplete. Typically, the AS path was
?
aggregated.
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Configuring Static Routing (J-Web Procedure) on page 1922
Configuring Static Routing (CLI Procedure) on page 1922
Layer 3 Protocols Supported on EX Series Switches on page 17
Chapter 78: Verifying Layer 3 Protocols Configuration
Additional Information
If a next hop is listed as
Discard
destination address is discarded rather than routed.
This value generally means that the route is a static
route for which the attribute has been set.
discard
If a next hop is listed as
Reject
destination address is rejected. This value generally
means that the address is unreachable. For example,
if the address is a configured interface address and the
interface is unavailable, traffic bound for that address
is rejected.
If a next hop is listed as , the destination is an
Local
address on the host (either the loopback address or
Ethernet management port 0 address, for example).
There are many possible flags.
, all traffic with that
, all traffic with that
1941