Show Route Active-Path - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show route active-path

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show route active-path show route active-path
2396
®
OS for EX Series Ethernet Switches, Release 10.4
show route active-path
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route active-path
<brief | detail | extensive | terse>
Command introduced in Junos OS Release 8.0.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display all active routes for destinations. An active route is a route that is selected as the
best path. Inactive routes are not displayed.
—Display all active routes.
none
brief | detail | extensive | terse
not specify a level of output, the system defaults to brief.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show route active-path on page 2396
show route active-path brief on page 2397
show route active-path detail on page 2397
show route active-path extensive on page 2398
show route active-path terse on page 2399
For information about output fields, see the output field tables for the show route
command, the show route detail, the show route extensive, or the show route terse.
user@host> show route active-path
inet.0: 7 destinations, 7 routes (6 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
10.255.70.19/32 *[Direct/0] 21:33:52
> via lo0.0
10.255.71.50/32 *[IS-IS/15] 00:18:13, metric 10
> to 100.1.2.1 via so-2/1/3.0
100.1.2.0/24 *[Direct/0] 00:18:36
> via so-2/1/3.0
100.1.2.2/32 *[Local/0] 00:18:41
Local via so-2/1/3.0
192.168.64.0/21 *[Direct/0] 21:33:52
> via fxp0.0
192.168.70.19/32 *[Local/0] 21:33:52
Local via fxp0.0
—(Optional) Display the specified level of output. If you do
—(Optional) Perform this operation on all logical
Copyright © 2010, Juniper Networks, Inc.