show route next-hop
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show route next-hop
show route next-hop
Copyright © 2010, Juniper Networks, Inc.
show route next-hop next-hop
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route next-hop next-hop
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the entries in the routing table that are being sent to the specified next-hop
address.
brief | detail | extensive | terse
logical-system (all | logical-system-name)
systems or on a particular logical system.
—Next-hop address.
next-hop
view
show route next-hop on page 2473
show route next-hop detail on page 2474
show route next-hop extensive on page 2475
show route next-hop terse on page 2477
For information about output fields, see the output field tables for the show route
command, the show route detail command, the show route extensive command, or
the show route terse command.
user@host> show route next-hop 192.168.71.254
inet.0: 18 destinations, 18 routes (17 active, 0 holddown, 1 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both
10.10.0.0/16
*[Static/5] 06:26:25
> to 192.168.71.254 via fxp0.0
10.209.0.0/16
*[Static/5] 06:26:25
> to 192.168.71.254 via fxp0.0
172.16.0.0/12
*[Static/5] 06:26:25
> to 192.168.71.254 via fxp0.0
192.168.0.0/16
*[Static/5] 06:26:25
> to 192.168.71.254 via fxp0.0
192.168.102.0/23
*[Static/5] 06:26:25
> to 192.168.71.254 via fxp0.0
207.17.136.0/24
*[Static/5] 06:26:25
> to 192.168.71.254 via fxp0.0
207.17.136.192/32
*[Static/5] 06:26:25
> to 192.168.71.254 via fxp0.0
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Display the specified level of ouput.
—(Optional) Perform this operation on all logical
2473