Leaveall-Timer (Mvrp) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

leaveall-timer (MVRP)

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
1676
®
OS for EX Series Ethernet Switches, Release 10.4
leaveall-timer milliseconds;
[edit protocols mvrp interface (all | interface-name)]
Statement introduced in Junos OS Release 10.0 for EX Series switches.
For Multiple VLAN Registration Protocol (MVRP), configure the interval at which the
LeaveAll state operates on the interface.
Maintain default timer settings unless there is a compelling reason to change the settings.
Modifying timers to inappropriate values might cause an imbalance in the operation of
MVRP.
10000 milliseconds
—Number of milliseconds between the sending of Leave All messages.
milliseconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
join-timer on page 1670
leave-timer on page 1674
Example: Configuring Automatic VLAN Administration Using MVRP on EX Series
Switches on page 1580
Configuring Multiple VLAN Registration Protocol (MVRP) (CLI Procedure) on page 1611
Copyright © 2010, Juniper Networks, Inc.