Show Isis Overview; Table 308: Show Isis Overview Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show isis overview

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields

Table 308: show isis overview Output Fields

Field Name Field Description
The IS-IS routing intance.
instance
Router ID of the routing device.
Router ID
Adjacency holddown capability:
Adjacency holddown
Maximum number of IS-IS areas advertised by the routing device.
Maximum Areas
Lifetime of the link-state PDU, in seconds.
LSP life time
Attached bit capability:
Attached bit evaluation
Delay before performing consecutive Shortest Path First calculations.
SPF delay
Delay before performing additional Shortest Path First (SPF) calculations after the maximum number
SPF holddown
of consecutive SPF calculations is reached.
2348
®
OS for EX Series Ethernet Switches, Release 10.4
show isis overview
<instance instance-name>
<logical-system (all | logical-system-name)>
show isis overview
<instance instance-name>
Command introduced in Junos OS Release 8.5.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display Intermediate System-to Intermediate System (IS-IS) overview information.
—Display standard overview information about IS-IS for all routing instances.
none
instance instance-name —(Optional) Display overview information for the specified routing
instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show isis overview on page 2349
Table 308 on page 2348 lists the output fields for the
fields are listed in the approximate order in which they appear.
enabled
—(Optional) Perform this operation on all logical
show isis overview
or .
enabled disabled
or .
disabled
command. Output
Copyright © 2010, Juniper Networks, Inc.