Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2095

Related
Documentation
bmp
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Applying Filters Provided by BGP Peers to Outbound Routes
bmp {
memory limit bytes;
station-address (ip-address | name);
station-port port-number;
statistics-timeout seconds;
}
[edit routing-options]
Statement introduced in Junos OS Release 9.5.
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Configure the BGP Monitoring Protocol (BMP), which enables the routing device to collect
data from the BGP
Adjacency-RIB-In
monitoring station.
memory-limit bytes —(Optional) Specify a threshold at which to stop collecting BMP data
if the limit is exceeded.
Default: 10 MB
Range: 1,048,576 through 52,428,800
station-address (ip-address | name)
monitoring where BMP data should be sent.
—Specify the port number of the monitoring station to use when
station-port port-number
sending BMP data.
statistics-timeout seconds
monitoring station.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring the BGP Monitoring Protocol
Chapter 79: Configuration Statements for Layer 3 Protocols
routing tables and periodically send that data to a
—Specify the IP address or a valid URL for the
—(Optional) Specify how often to send BMP data to the
1991