Route-Type-Community; Route-Timeout - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

route-timeout

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

route-type-community

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
route-timeout seconds;
[edit logical-systems logical-system-name protocols ripng],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ripng],
[edit protocols ripng],
[edit routing-instances routing-instance-name protocols ripng]
Statement introduced in Junos OS Release 7.6.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for routing instances introduced in Junos OS Release 9.0.
Configure the route timeout interval for RIPng.
—Estimated time to wait before making updates to the routing table.
seconds
Range: 30 through 360 seconds
Default: 180 seconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring RIPng Timers
route-type-community (iana | vendor);
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3)],
[edit routing-instances routing-instance-name protocols (ospf | ospf3)]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Specify an extended community value to encode the OSPF route type. Each extended
community is coded as an eight-octet value. This statement sets the most significant
bit to either an IANA or vendor-specific route type.
iana —Encode a route type with the value
—Encode the route type with the value
vendor
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring OSPF Domain IDs for VPNs
Chapter 79: Configuration Statements for Layer 3 Protocols
0x0306 . This is the default value.
.
0x8000
2185