Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1678

Complete Software Guide for Junos
Results
1574
®
OS for EX Series Ethernet Switches, Release 10.4
[edit vlans]
user@switch# set pvlan interface ge-0/0/0.0
user@switch# set pvlan interface ge-1/0/0.0
For each secondary VLAN, configure access interfaces:
5.
NOTE: We recommend that the secondary VLANs be untagged VLANs.
It does not impair functioning if you tag the secondary VLANS. However,
the tags are not used when a secondary VLAN is configured on a single
switch.
[edit vlans]
user@switch# set hr-comm interface ge-0/0/11.0
user@switch# set hr-comm interface ge-0/0/12.0
user@switch# set finance-comm interface ge-0/0/13.0
user@switch# set finance-comm interface ge-0/0/14.0
For each community VLAN, set the primary VLAN:
6.
[edit vlans]
user@switch# set hr-comm primary-vlan pvlan
user@switch# set finance-comm primary-vlan pvlan
Add each isolated interface to the primary VLAN:
7.
[edit vlans]
user@switch# set pvlan interface ge-0/0/15.0
user@switch# set pvlan interface ge-0/0/16.0
Check the results of the configuration:
[edit]
user@switch# show
interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members pvlan;
}
}
}
}
ge-1/0/0 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/11 {
Copyright © 2010, Juniper Networks, Inc.