Monitoring Gvrp; Table 236: Summary Of Gvrp Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Table 235: Ethernet Switching Output Fields (continued)
Field
VLAN-Name
MAC Address
Time
State
Related
Documentation

Monitoring GVRP

Purpose
Action
Meaning

Table 236: Summary of GVRP Output Fields

Field
Global GVRP Configuration
GVRP Status
GVRP Timers
GVRP Interface Details
Interface Name
Protocol Status
Copyright © 2010, Juniper Networks, Inc.
Value
The VLAN name.
The learned MAC address associated with the VLAN ID.
Timestamp for the time at which when the MAC address was added or deleted from the
MAC learning log.
Operating state of the interface. Values are
Configuring MAC Table Aging (CLI Procedure) on page 1602
Understanding Bridging and VLANs on EX Series Switches on page 1501
Use the monitoring feature to view information about the GVRP configuration on the EX
Series switch.
To monitor GVRP in the J-Web interface, select
To monitor GVRP in the CLI, enter the following command:
show gvrp
Table 236 on page 1629 summarizes the GVRP output fields.
Value
Displays whether GVRP is enabled or disabled.
Join—The number of milliseconds the interfaces must wait before sending VLAN
advertisements.
Leave—The number of milliseconds an interface must wait after receiving a Leave message
to remove the interface from the VLAN specified in the message.
Leave All—The interval in milliseconds at which Leave All messages are sent on interfaces.
Leave All messages maintain current GVRP VLAN membership information in the network.
The interface on which GVRP is configured.
Displays whether GVRP is enabled or disabled on the interface.
Chapter 66: Verifying Bridging and VLAN Configuration
and .
Up Down
Monitor > Switching > GVRP
.
1629