Ssm-Groups - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Required Privilege
Level
Related
Documentation

ssm-groups

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Default: 5000 milliseconds
—Maximum number of times the SPF algorithm can run in succession.
rapid-runs number
After the maximum is reached, the holddown interval begins.
Range: 1 through 5
Default: 3
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring SPF Options for OSPF
Configuring Multitopology Routing in OSPF
ssm-groups [ ip-addresses ];
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options multicast],
[edit logical-systems logical-system-name routing-options multicast],
[edit routing-instances routing-instance-name routing-options multicast],
[edit routing-options multicast]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure source-specific multicast (SSM) groups.
By default, the SSM group multicast address is limited to the IP address range from
through
232.0.0.0 232.255.255.255
Class D range by including the
SSM address range from 232.0.0.0
statement. This statement is for adding other multicast addresses to the
ssm-groups
default SSM group addresses. This statement does not override the default SSM group
address range.
—List of one or more additional SSM group addresses separated by a space.
ip-addresses
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring Source-Specific Multicast Groups with Any-Source Override
Chapter 79: Configuration Statements for Layer 3 Protocols
. However, you can extend SSM operations into another
statement in the configuration. The default
ssm-groups
through 232.255.255.255 cannot be used in the
2195