Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1801

Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
If you use the default factory configuration, all switch interfaces become part of the VLAN
.
default
vlan-name —Name of the VLAN. The name can contain letters, numbers, hyphens (-),
and periods (.) and can be up to 255 characters long.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing–control—To add this statement to the configuration.
Configuring VLANs for EX Series Switches (CLI Procedure) on page 1600
Configuring VLANs for EX Series Switches (J-Web Procedure) on page 1597
Configuring Q-in-Q Tunneling (CLI Procedure) on page 1608
Creating a Series of Tagged VLANs (CLI Procedure) on page 1604
Configuring Routed VLAN Interfaces (CLI Procedure) on page 1601
Understanding Q-in-Q Tunneling on EX Series Switches on page 1514
Understanding Bridging and VLANs on EX Series Switches on page 1501
Chapter 68: Configuration Statements for Bridging and VLANs
1697