Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1885

Configuring MSTP on Switch 2
CLI Quick
Configuration
Step-by-Step
Procedure
Copyright © 2010, Juniper Networks, Inc.
To configure on Switch 2, perform these tasks:
To quickly configure interfaces and MSTP on Switch 2, copy the following commands
and paste them into the switch terminal window:
[edit]
set vlans voice-vlan description "Voice VLAN"
set vlans voice-vlan vlan—id 10
set vlans employee-vlan description "Employee VLAN"
set vlans employee-vlan vlan-id 20
set vlans guest-vlan description "Guest VLAN"
set vlans guest-vlan vlan-id 30
set vlans camera-vlan description "Camera VLAN"
set vlans camera-vlan vlan-id 40
set interfaces ge–0/0/14 unit 0 family ethernet-switching vlan members [10 20 30 40]
set interfaces ge-0/0/18 unit 0 family ethernet-switching vlan members [10 20 30 40]
set interfaces ge-0/0/14 unit 0 family ethernet-switching port-mode trunk
set interfaces ge-0/0/18 unit 0 family ethernet-switching port-mode trunk
set protocols mstp configuration-name region1
set protocols mstp bridge-priority 32k
set protocols mstp interface ge-0/0/14.0 cost 1000
set protocols mstp interface ge-0/0/14.0 mode point-to-point
set protocols mstp interface ge-0/0/18.0 cost 1000
set protocols mstp interface ge-0/0/18.0 mode point-to-point
set protocols mstp msti 1 bridge-priority 32k
set protocols mstp msti 1 vlan [10 20]
set protocols mstp msti 2 bridge-priority 4k
set protocols mstp msti 2 vlan [30 40]
To configure interfaces and MSTP on Switch 2:
Configure the VLANs
1.
[edit vlans]
user@switch2# set voice-vlan description "Voice VLAN"
user@switch2# set voice-vlan vlan-id 10
user@switch2# set employee-vlan description "Employee VLAN"
user@switch2# set employee-vlan vlan-id 20
user@switch2# set guest-vlan description "Guest VLAN"
user@switch2# set guest-vlan vlan-id 30
user@switch2# set camera-vlan vlan-description "Camera VLAN"
user@switch2# set guest-vlan vlan-id 40
Configure the VLANs on the interfaces, including support for the Ethernet Switching
2.
protocol:
[edit interfaces]
user@switch2# set ge-0/0/14 unit 0 family ethernet-switching vlan members [10 20
30 40]
user@switch2# set ge-0/0/18 unit 0 family ethernet-switching vlan members [10 20
30 40]
Configure the port mode for the interfaces:
3.
[edit interfaces]
user@switch2# set ge-0/0/14 unit 0 family ethernet-switching port-mode trunk
user@switch2# set ge-0/0/18 unit 0 family ethernet-switching port-mode trunk
Chapter 71: Examples of Spanning-Tree Protocols Configuration
, ,
voice-vlan employee-vlan
, and
guest-vlan camera-vlan
:
1781