Allow - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

allow

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1950
®
OS for EX Series Ethernet Switches, Release 10.4
allow (all | [ network/mask-length ]);
[edit logical-systems logical-system-name protocols bgp group group-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name],
[edit protocols bgp group group-name],
[edit routing-instances routing-instance-name protocols bgp group group-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Implicitly configure BGP peers, allowing peer connections from any of the specified
networks or hosts. To configure multiple BGP peers, configure one or more networks and
hosts within a single allow
—Allow all addresses, which is equivalent to
all
—IPv6 or IPv4 network number of a single address or a range of
network/mask-length
allowable addresses for BGP peers, followed by the number of significant bits in the
subnet mask.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
neighbor on page 2108
Minimum BGP Configuration
Configuring BGP Groups and Peers
statement or include multiple
0.0.0.0/0
allow statements.
(or ).
::/0
Copyright © 2010, Juniper Networks, Inc.