Configuring Vlans For Ex Series Switches (Cli Procedure); Table 229: Components Of The Topology For Setting Up Q-In-Q Tunneling - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Requirements
Overview and Topology

Table 229: Components of the Topology for Setting Up Q-in-Q Tunneling

Interface
ge-0/0/11.0
ge-0/0/12.0
ge-0/0/13.0
ge-0/0/14.0
Configuration
CLI Quick
Configuration
Copyright © 2010, Juniper Networks, Inc.
Configuration on page 1569
Verification on page 1570
This example requires one EX Series switch with Junos OS Release 9.3 or later for EX
Series switches.
Before you begin setting up Q-in-Q tunneling, make sure you have created and configured
the necessary customer VLANs. See "Configuring VLANs for EX Series Switches (CLI
Procedure)" on page 1600 or "Configuring VLANs for EX Series Switches (J-Web Procedure)"
on page 1597.
In this service provider network, there are multiple customer VLANs mapped to one
service VLAN.
Table 229 on page 1569 lists the settings for the example topology.
Description
Tagged S-VLAN trunk port
Untagged customer-facing access port
Untagged customer-facing access port
Tagged S-VLAN trunk port
To quickly create and configure Q-in-Q tunneling, copy the following commands and
paste them into the switch terminal window:
[edit]
set vlans qinqvlan vlan-id 4001
set vlans qinqvlan dot1q-tunneling customer-vlans 1-100
set vlans qinqvlan dot1q-tunneling customer-vlans 201-300
set interfaces ge-0/0/11 unit 0 family ethernet-switching port-mode trunk
set interfaces ge-0/0/11 unit 0 family ethernet-switching vlan members 4001
set interfaces ge-0/0/12 unit 0 family ethernet-switching port-mode access
set interfaces ge-0/0/12 unit 0 family ethernet-switching vlan members 4001
set interfaces ge-0/0/13 unit 0 family ethernet-switching port-mode access
set interfaces ge-0/0/13 unit 0 family ethernet-switching vlan members 4001
set interfaces ge-0/0/14 unit 0 family ethernet-switching port-mode trunk
set interfaces ge-0/0/14 unit 0 family ethernet-switching vlan members 4001
set ethernet-switching-options dot1q-tunneling ether-type 0x9100
Chapter 64: Examples: Bridging and VLAN Configuration
1569