Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2387

show (ospf | ospf3) route
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
show (ospf | ospf3) route
<brief | detail | extensive>
<abr | asbr | extern | inter | intra>
<instance instance-name
<logical-system (all | logical-system-name)>
<network>
<realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)>
<router>
<topology topology-name>
<transit>
show (ospf | ospf3) route
<brief | detail | extensive>
<abr | asbr | extern | inter | intra>
<instance instance-name
<network>
<router>
<topology topology-name>
<transit>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced in Junos OS Release 9.0.
topology
option introduced in Junos OS Release 9.2.
realm
Display the entries in the Open Shortest Path First (OSPF) routing table.
—Display standard information about all entries in the OSPF routing table for all
none
routing instances and all topologies.
brief | detail | extensive —(Optional) Display the specified level of output.
—(Optional) Display routes to area border routers.
abr
asbr —(Optional) Display routes to autonomous system border routers.
—(Optional) Display external routes.
extern
inter —(Optional) Display interarea routes.
—(Optional) Display intra-area routes.
intra
instance instance-name —(Optional) Display entries for the specified routing instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
—(Optional) Display routes to networks.
network
realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)
entries in the routing table for the specified OSPFv3 realm, or address family. Use
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
—(OSPFv3 only) (Optional) Display
2283