show route community-name
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show route
show route
community-name
community-name
Copyright © 2010, Juniper Networks, Inc.
show route community-name community-name
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route community-name community-name
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the route entries in each routing table that are members of a Border Gateway
Protocol (BGP) community, specified by a community name.
—Name of the community.
community-name
brief | detail | extensive | terse
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show route community-name on page 2413
For information about output fields, see the output field tables for the show route
command, the show route detail command, the show route extensive command, or
the show route terse command.
user@host> show route community-name red-com
inet.0: 17 destinations, 17 routes (16 active, 0 holddown, 1 hidden)
inet.3: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
instance1.inet.0: 2 destinations, 2 routes (2 active, 0 holddown, 0 hidden)
red.inet.0: 11 destinations, 11 routes (11 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.255.245.212/32
*[BGP/170] 00:04:40, localpref 100, from 10.255.245.204
AS path: 300 I
> to 100.1.2.2 via ge-1/1/0.0, label-switched-path to_fix
20.20.20.20/32
*[BGP/170] 00:04:40, localpref 100, from 10.255.245.204
AS path: I
> to 100.1.2.2 via ge-1/1/0.0, label-switched-path to_fix
100.1.4.0/24
*[BGP/170] 00:04:40, localpref 100, from 10.255.245.204
AS path: I
> to 100.1.2.2 via ge-1/1/0.0, label-switched-path to_fix
iso.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
mpls.0: 5 destinations, 5 routes (5 active, 0 holddown, 0 hidden)
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Display the specified level of output.
—(Optional) Perform this operation on all logical
2413