No-Dynamic-Vlan; No-Local-Switching - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

no-dynamic-vlan

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation

no-local-switching

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
1684
®
OS for EX Series Ethernet Switches, Release 10.4
no-dynamic-vlan;
[edit protocols mvrp]
Statement introduced in Junos OS Release 10.0 for EX Series switches.
Disable the dynamic creation of VLANs using Multiple VLAN Registration Protocol (MVRP)
for interfaces participating in MVRP.
Dynamic VLAN configuration can be enabled on an interface independent of MVRP. The
MVRP dynamic VLAN configuration setting does not override the interface configuration
dynamic VLAN configuration setting. If dynamic VLAN creation is disabled on the interface
in the interface configuration, no dynamic VLANs are created on the interface, including
dynamic VLANs created using MVRP.
This option can only be applied globally; it cannot be applied per interface.
If MVRP is enabled, the dynamic creation of VLANs as a result of MVRP protocol exchange
messages is enabled.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Multiple VLAN Registration Protocol (MVRP) (CLI Procedure) on page 1611
no-local-switching
[edit vlans vlan-name]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Specify that access ports in this VLAN domain do not forward packets to each other. You
use this statement with primary VLANs and isolated secondary VLANs.
system—To view this statement in the configuration.
system–control—To add this statement to the configuration.
Example: Configuring a Private VLAN on a Single EX Series Switch on page 1571
Creating a Private VLAN on a Single EX Series Switch (CLI Procedure) on page 1607
Copyright © 2010, Juniper Networks, Inc.