Summaries - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

summaries

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
(summaries | no-summaries);
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id nssa],
[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id nssa],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id nssa],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id nssa],
[edit protocols (ospf | ospf3) area area-id nssa],
[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)] area area-id
nssa],
[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id nssa],
[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id nssa]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for the realm statement introduced in Junos OS Release 9.2.
Support for the statement introduced in Junos OS Release 9.2 for EX Series
realm
switches.
Configure whether or not area border routers advertise summary routes into an
not-so-stubby area (NSSA):
—Flood summary link-state advertisements (LSAs) into the NSSA.
summaries
—Prevent area border routers from advertising summaries into an NSSA.
no-summaries
If default-metric is configured for an NSSA, a Type 3 LSA is injected into the area by
default.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
nssa on page 2127
stub on page 2201
Configuring OSPF Areas
Chapter 79: Configuration Statements for Layer 3 Protocols
2203