Metric-In - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

metric-in

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
2098
®
OS for EX Series Ethernet Switches, Release 10.4
metric-in metric;
[edit logical-systems logical-system-name protocols ripng],
[edit logical-systems logical-system-name protocols ripng group group-name neighbor
neighbor-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ripng],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ripng group group-name neighbor neighbor-name],
[edit protocols ripng],
[edit protocols ripng group group-name neighbor neighbor-name],
[edit routing-instances routing-instance-name protocols ripng],
[edit routing-instances routing-instance-name protocols ripng group group-name neighbor
neighbor-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for routing instances introduced in Junos OS Release 9.0.
Specify the metric to add to incoming routes when advertising into RIPng routes that
were learned from other protocols. Use this statement to configure the routing device to
prefer RIPng routes learned through a specific neighbor.
—Metric value.
metric
Range: 1 through 16
Default: 1
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring the Metric Value Added to Imported RIPng Routes
Copyright © 2010, Juniper Networks, Inc.