Show Route Damping - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show route damping

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 322: show route damping Output Fields
Field Name Field Description
Name of the routing table—for example,
routing-table-name
destinations Number of destinations for which there are routes in the routing table.
Copyright © 2010, Juniper Networks, Inc.
show route damping (decayed | history | suppressed)
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route damping (decayed | history | suppressed)
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the Border Gateway Protocol (BGP) routes for which updates might have been
reduced because of route flap damping.
brief | detail | extensive | terse
not specify a level of output, the system defaults to brief.
—Display route damping entries that might no longer be valid, but are not
decayed
suppressed.
history —Display entries that have already been withdrawn, but have been logged.
logical-system (all | logical-system-name)
systems or on a particular logical system.
suppressed —Display entries that have been suppressed and are no longer being installed
into the forwarding table or exported by routing protocols.
view
clear bgp damping on page 2246
show policy damping on page 2379
show route damping decayed detail on page 2418
show route damping history on page 2418
show route damping history detail on page 2419
Table 322 on page 2415 lists the output fields for the
fields are listed in the approximate order in which they appear.
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Display the specified level of output. If you do
—(Optional) Perform this operation on all logical
show route damping
.
inet.0
command. Output
Level of Output
All levels
All levels
2415