Show Rip General-Statistics; Table 315: Show Rip General-Statistics Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show rip general-statistics

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
show rip show rip
general-statistics general-statistics
Copyright © 2010, Juniper Networks, Inc.
show rip general-statistics
<logical-system (all | logical-system-name)>
show rip general-statistics
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display brief Routing Information Protocol (RIP) statistics.
—Display brief RIP statistics.
none
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
clear rip general-statistics on page 2260
show rip general-statistics on page 2381
Table 315 on page 2381 lists the output fields for the
Output fields are listed in the approximate order in which they appear.

Table 315: show rip general-statistics Output Fields

Field Name
bad msgs
no recv intf
curr memory
max memory
user@host> show rip general-statistics
RIPv2 I/O info:
bad msgs :
no recv intf :
curr memory :
max memory :
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
show rip general-statistics
Field Description
Number of invalid messages received.
Number of packets received with no matching interface.
Amount of memory currently used by RIP.
Most memory used by RIP.
0
0
0
0
command.
2381