Interface - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

interface

Syntax
Hierarchy Level
Copyright © 2010, Juniper Networks, Inc.
interface (all | interface-name) {
disable;
bfd-liveness-detection {
authentication {
algorithm algorithm-name;
key-chain key-chain-name;
loose-check;
}
detection-time {
threshold milliseconds;
}
minimum-interval milliseconds;
minimum-receive-interval milliseconds;
transmit-interval {
threshold milliseconds;
minimum-interval milliseconds;
}
multiplier number;
}
checksum;
csnp-interval (seconds | disable);
hello-padding (adaptive | loose | strict);
ldp-synchronization {
disable;
hold-time seconds;
}
lsp-interval milliseconds;
mesh-group (value | blocked);
no-adjacency-holddown;
no-ipv4-multicast;
no-ipv6-multicast;
no-ipv6-unicast;
no-unicast-topology;
passive;
point-to-point;
level level-number {
disable;
hello-authentication-type authentication;
hello-authentication-key key;
hello-interval seconds;
hold-time seconds;
ipv4-multicast-metric number;
ipv6-multicast-metric number;
ipv6-unicast-metric number;
metric metric;
passive;
priority number;
te-metric metric;
}
}
[edit logical-systems logical-system-name protocols isis],
Chapter 79: Configuration Statements for Layer 3 Protocols
2061